Fluke Speaker Rev. 4 Manuale Utente Scaricare il pdf (Pagina 67)

Documenting Process Calibrator

Using Source Mode

8. Fill in the parameters as prompted. Enter the

Start Value, End Value, and Ramp Time.

9. If you want to automatically stop ramping if a trip

condition is detected, set the Trip Detect to

Enabled, and select Voltage or Continuity as

the trip function.

10. Press the Done softkey. Note the RAMP

annunciator next to SOURCE at the top of the

display.

11. Select a low-to-high ramp or a high-to-low ramp

with the Ramp Up/Down softkey.

12. To start ramping, press the Start Ramp softkey.

13. Ramping continues until a trip is detected (if

enabled), the ramp time expires, or you press

the Stop Ramp softkey.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 117 118

Nessun commento

Fluke Speaker Rev. 4 Manuale Utente Pagina 67